Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Handle on a Lancia Y

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Handle

To remove the rear door handle on the Lancia Y, first open the door and use a screwdriver to remove the cap; insert the Torx key and unscrew the screw without removing it; extract the handle opening block; at this point, slide out the old handle and remove the broken piece; take off the seal and clean the dirty inner part with a cloth and suitable degreaser; clean the lock block with WD-40 and a brush; apply a bit of WD-40 to the part to be inserted; insert the handle until it clicks; now insert the seal; apply grease to the opening block; insert the lock block; tighten the screw with the Torx key; replace the protective cap.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handle of a Lancia Ypsilon
How to Remove the Handle of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Do you want to replace the left external handle (driver's side) of a Lancia Ypsilon? In this video, we briefly see how to remove the handle from the …
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) Before starting, open the front door of your Lancia Ypsilon. Begin by lowering and holding the seat folding handle, then unclip and move the internal…
How to remove the external door handles on a Lancia Ypsilon
How to remove the external door handles on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To remove the external door handles on your Lancia Ypsilon, you can follow these steps. Keep in mind that the instructions may vary depending on the …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos