|
Do it yourself
| |||
| ||||
Replacing the Radio in the Lancia Ypsilon
Model: Lancia Ypsilon
843, MK 2, Ypsilon 2, Y2
- Years 2003-2011
The video shows how to replace the radio in the Lancia Ypsilon (and adapt the original fascia) because it is faulty or drains the battery when the car is off. This is a DIY operation that can be completed in a few minutes. Remove the old radio. Unscrew the electronic part of the control panel. Using a small knife, create the opening for the new radio on the fascia. Do the same for the electronic part. Refit it to hold the buttons in place, even though they will no longer function. Insert the new radio into the fascia, screw in the counter fascia, and then glue the two side buttons. Create two brackets to hold the radio in place. Drill two holes to screw in the radio. Connect the cables appropriately.
Updated on 2 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Lancia Ypsilon
(2003-2011 /
843, MK 2, Ypsilon 2, Y2)
In this video tutorial, we will go through the steps to install a Bluetooth kit on the second series Lancia Ypsilon, following the instructions below…
Lancia Ypsilon
(2011-2023 /
MK 3, Y3, Ypsilon 3, 846)
Connecting your smartphone to the Uconnect system in a Lancia Ypsilon is very simple. First, activate Bluetooth on your smartphone, then turn on the …
Lancia Ypsilon
(2011-2023 /
MK 3, Y3, Ypsilon 3, 846)
To replace the radio of the Lancia Ypsilon, insert the appropriate U-shaped keys into the four holes located at the corners of the device. Once the k…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.119
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |