Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Lancia Ypsilon Elefantino

Model: Lancia Ypsilon Y1, Ypsilon 1, MK 1, 840 - Years 1996-2003
Part: Cabin air filter

In this video tutorial, you can see how to replace the pollen filter on a Lancia Ypsilon Elefantino. The first step is to purchase a new pollen filter. Next, get inside the vehicle and turn off the engine, then pull the handbrake. You can find the pollen filter in the top left of the engine bay, so lift the bonnet and secure it with the prop rod. Remove the cover of the pollen filter housing; take out the old pollen filter, clean its housing, and fit the new filter following the arrows on the new filter.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Filter on a Lancia Ypsilon
Replacing the Cabin Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video, you will learn how to replace the cabin filter on a Lancia Ypsilon. The filter is located directly behind the plastic panel on the lef…
How to Remove the Cabin Filter from a Lancia Ypsilon
How to Remove the Cabin Filter from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) This video shows how to remove the cabin filter from a Lancia Ypsilon. Open the glove compartment and unclip the plastic guides (unscrew the securing…
How to Remove the Pollen Filter on a Lancia Ypsilon
How to Remove the Pollen Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Let's see how to remove the pollen filter on a Lancia Ypsilon. Detach the side plastics (located on the right side of the centre tunnel), unscrew the…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos