Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter from a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Cabin air filter

This video shows how to remove the cabin filter from a Lancia Ypsilon. Open the glove compartment and unclip the plastic guides (unscrew the securing screws around the perimeter), then rotate the glove box forward; pull off the cover plate and slide the air filter out of its housing as shown in the video. Once this is done, insert the new air filter into the filter holder (be careful to insert the filter correctly without bending it). Finally, refit the cover of the box and the glove compartment as you removed them earlier.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter of the Lancia Ypsilon
How to Replace the Pollen Filter of the Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In today's video, you will see how to replace the cabin air filter in the Lancia Ypsilon. First, open the passenger side door. Then open the glove co…
Replacing the Cabin Filter on a Lancia Ypsilon
Replacing the Cabin Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video, you will learn how to replace the cabin filter on a Lancia Ypsilon. The filter is located directly behind the plastic panel on the lef…
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) Before starting, open the front door of your Lancia Ypsilon. Begin by lowering and holding the seat folding handle, then unclip and move the internal…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos