Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
MK 3, 846, Ypsilon 3, Y3
- Years 2011-2023 The procedure to reset the Service light on the Lancia Ypsilon cannot be carried out using the buttons on the dashboard: in order to turn off the light, a diagnostic tool must be used. Once the scanner is connected to the OBD port located under the steering column, it will be possible to select the specific car model and its corresponding version. After the scanner is connected, the reset of the light can be performed. By disconnecting the tool and accessing the menu on the central display, it can be verified that the maintenance interval has been restored.
Posted on 17 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |