Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Land Rover Evoque 2023

Model: Land Rover Evoque MK 2, L551 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Completing the manual reset of the service light on your Land Rover Evoque (year 2023) is really very simple. If you want to perform this operation on your own, just read the following guide carefully and follow all the steps described.

Once inside the car and in the driver's seat, turn on the instrument panel and open the door. At this point, press the brake pedal all the way down for about three seconds, then also press the accelerator pedal and wait for the service light reset to complete.

Finally, release the pedals and turn off the car's instrument panel.


Posted on 26 February 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a Land Rover Evoque
How to Reset the Oil Service Light on a Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Oil Service light on a Land Rover Evoque, turn on the vehicle's ignition while keeping the driver's door open; once this is done, press …
How to Reset the Service Light on a Land Rover Evoque
How to Reset the Service Light on a Land Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) To reset the Service light that appears on the instrument cluster of a Land Rover Evoque, pull the lever located near the footwell to unlock the hood…
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Service light on a Land Rover Evoque, enter the cabin and turn on the ignition after inserting the key. Once the ignition is on, open th…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos