Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How do you replace the Land Rover Freelander diesel filter?

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Diesel filter
Operation: How do you replace the Land Rover Freelander diesel filter?

The replacement of the diesel filter of the Land Rover Freelander is carried out by opening the bonnet, in order to have access to the components located inside the engine compartment: the plastic cover of the upper part of the engine block must be detached, so to access the underlying components. The diesel filter is located at the bottom right, near the front left headlight: it will be necessary to remove it from its housing by unscrewing the screws that fix it and disconnecting the corresponding supply pipes. In this way it will be possible to insert the new filter, reassembling all the previously removed components.


Posted on 27 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Freelander 2006-2016 - Where is the fuel filter of the Land Rover Freelander located? Read Answer
    • Freelander 2006-2016 - Where is the Land Rover Freelander TD4 diesel filter located? Read Answer
    • Freelander 2006-2016 - Where is the Land Rover Freelander 2 diesel filter located? Read Answer
    • Freelander 1997-2006 - Where is the diesel filter on Land Rover Freelander first series? Read Answer
    • Freelander 2006-2016 - Where is the diesel filter on Land Rover Freelander Read Answer
    • Freelander 2006-2016 - Where is the Land Rover Freelander II diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos