Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to replace the diesel filter on a Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Diesel filter
Operation: How to replace the diesel filter on a Land Rover Freelander

Before we can start, we will have to go and open the front hood of our Land Rover Freelander. So let's start by disengaging and removing the top engine cover. After that, we will have to go and disconnect the hoses and the electrical connector connected to the diesel filter. Once this is done, we will have to unscrew and remove the bolts that secure the diesel filter to its housing. By doing so, we will have freed the diesel filter, which we can remove, and we will have finished the disassembly. To fit the new diesel filter, all we have to do is follow these instructions in reverse, and we will have completed the replacement.


Posted on 27 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Freelander 2006-2016 - Where is the fuel filter of the Land Rover Freelander located? Read Answer
    • Freelander 2006-2016 - Where is the Land Rover Freelander TD4 diesel filter located? Read Answer
    • Freelander 2006-2016 - Where is the Land Rover Freelander 2 diesel filter located? Read Answer
    • Freelander 1997-2006 - Where is the diesel filter on Land Rover Freelander first series? Read Answer
    • Freelander 2006-2016 - Where is the diesel filter on Land Rover Freelander Read Answer
    • Freelander 2006-2016 - Where is the Land Rover Freelander II diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos