Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to change the brake disc on a Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Brake discs
Operation: How to change the brake disc on a Freelander

Let's see in this video how to change the disc brake with relative brake pads on a Land Rover Freelander. First of all we lift the car on a column point to the desired height, immediately after we go to remove the rim (with a telescopic wrench or an air drill) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the caliper support. We remove the caliper support from the wheel hub with a socket wrench. Once the brake disc is free, let's unscrew the screws with a screwdriver and unscrew the disc from the wheel hub. Let's get ready to assemble the new disc with its pads, proceeding backwards in the operations.


Posted on 30 September 2023 by ScegliAuto



How to change the oil on the differential of the Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Do we want to change the oil of the car differential? We don't know how to do it? Let's see how to change the oil on Freelander 2. We lift the car on
When to change the Land Rover Freelander 2 timing belt
Land Rover Freelander (2006-2016 / Freelander 2) In this video we will show you when to change the Land Rover Freelander 2 timing belt. As you can see in the video, the timing belt must be replaced
How to replace brake pads
Land Rover Freelander (1997-2006 / Freelander 1) The efficiency of the braking system of your car is necessary to guarantee the complete safety of the driver, passengers and other motorists. It is t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos