Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads

Model: Land Rover Freelander Freelander 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake pads

See other generations:
Video tutorial

The efficiency of your vehicle's braking system is essential for ensuring the complete safety of the driver, passengers, and other road users. It is necessary to replace parts that may be subject to wear, such as brake pads, to ensure the vehicle functions properly.

You will need an Allen key, a jack, a flathead screwdriver, and a compressor. Using a 9mm hex key, remove the bolts that secure the caliper to the hub on the rear side.

Once the bolts are removed, you can slide the caliper off the disc.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Change the Differential Oil on a Freelander 2
How to Change the Differential Oil on a Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Do you want to change the oil in the car's differential? Not sure how to do it? Let's see how to replace the oil on a Freelander 2. Lift the car on a…
How to Replace the Third Brake Light Bulb on a Freelander 2
How to Replace the Third Brake Light Bulb on a Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) How do you replace the bulb in the third rear lamp? Here’s how to change the bulb inside the Freelander's lamp. Unlock the plastic at the tailgate to…
How to Replace the Gear Knob on a Land Rover Freelander
How to Replace the Gear Knob on a Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) Want to replace the gear knob on a Land Rover Freelander? Here’s how to do it. Use a plastic lever to detach the leather gaiter frame, then grasp the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos