Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb on a Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

How do you replace the bulb in the third rear lamp? Here’s how to change the bulb inside the Freelander's lamp. Unlock the plastic at the tailgate to access the fog lamp located alongside the panel.

Unlock the plastic of the rear lamp, disconnect the bulb holder, remove the damaged bulb, and fit a new one (same size and voltage). Refit the plastic lamp into the tailgate of the car. Test the correct operation of the new bulbs fitted in the third lamp.

Secure the cover plastics at the end of the maintenance.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Change the Dipped Beam Bulb on a Land Rover Freelander 1
How to Change the Dipped Beam Bulb on a Land Rover Freelander 1
Land Rover Freelander (1997-2006 / Freelander 1) To change the bulb on the Land Rover Freelander, open the bonnet and secure it with the support rod. Go to the back of the headlamp where the bulb ne…
Removing Fog Light from Freelander 2
Removing Fog Light from Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Let's see how to remove the fog light from the Land Rover Freelander. Locate the light unit at the bottom of the bumper and start the removal process…
How to Replace the Front Headlamp Bulb on the Land Rover Freelander
How to Replace the Front Headlamp Bulb on the Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) Today, let's go through the steps on how to remove and replace the front headlamp bulb on the Land Rover Freelander. First, open the vehicle's bonnet…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos