Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Lexus UX 200?

Model: Lexus UX MK 1 - Years 2018-2026
Part: Warning light – error code

Resetting the tire pressure light in the Lexus UX 200, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have restored the correct tire pressure following the instructions in the manual. We start by going inside the cabin, then we turn on the instrument panel and, using the directional arrows on the steering wheel, we reach the settings menu. We then enter "Vehicle Settings", "TPWS", move the selector to the "Set Pressure" option and perform the reset by holding down the "OK" button.

Posted on 18 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire indicator light in the Lexus UX 200?
How to reset the tire indicator light in the Lexus UX 200?
Lexus UX (2018-2026 / MK 1) In this tutorial, we can see how to reset the tire warning light in the Lexus UX 200, an extremely simple and quick operation, to be performed only o…
How to reset the tire pressure light in the Lexus UX 200?
How to reset the tire pressure light in the Lexus UX 200?
Lexus UX (2018-2026 / MK 1) .. In this tutorial, we can see how to reset the tire pressure light in the Lexus UX 200, an extremely simple and quick operation, to.. …
How to reset the tire pressure light on the Lexus UX 200?
How to reset the tire pressure light on the Lexus UX 200?
Lexus UX (2018-2026 / MK 1) .. In this tutorial, we can see how to reset the tire pressure light in the Lexus UX 200, a very simple and quick operation. Before doing.. …

Other guides you may be interested in

Removing the Rear Door Panel of the Punto Evo

Here’s how to remove the rear door panel: gently pull the window lift lever and detach the metal clip holding it in place using a flathead screwdriver; once removed, take off the plastic cap behind the door opening lever and unscrew the hex screw inside, along with the two screws located under the panel handle as shown in the video. After removing the two cross-head screws under the door panel, you can detach it from the door using two levers to extract the plastic clips (taking care not to break them). Once the panel is separated, disconnect the wire that operates the door opening lever by detaching it from its housing as demonstrated in the video. After completing the necessary operation (in the video, the window lifter was being fixed), proceed in reverse order to reposition the panel, close it, and secure it.

Watch the video!


by ScegliAuto

More videos