Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Lexus remote control

Model: Lexus Lexus Various
Part: Key

Video tutorial

How do you change the battery of a Lexus car remote control? Assuming that the method is more or less the same for all cars, let's see how to proceed in this video. First of all, remove the physical emergency key by sliding it from the keychain ring side.

Using the key itself, lever inside the hole left by the key, pulling it out of the body, in order to lift the two halves of which it is composed. Once the part with the logo is removed, we find the button battery container, and lift the cover, always using the physical key. Underneath, we find a common CR2032 battery, available at any supermarket.

Replace it, being careful to put it back with the polarity in the correct position, and then close the remote control.


Posted on 8 May 2025 by ScegliAuto


Related tutorials

How to replace the battery of a Lexus key
How to replace the battery of a Lexus key
Lexus Lexus Various Today we will explain how to replace the battery of a new generation vehicle key. To replace the battery of a Lexus key, we need to use a flat-head s…
How to use the manual key if the Lexus remote fails
How to use the manual key if the Lexus remote fails
Lexus Lexus Various Let's see how to enter your Lexus if the remote of your vehicle runs out of battery: you can still open it and start it. Press the button and remove …
How to Replace the Battery in a Lexus Car Remote
How to Replace the Battery in a Lexus Car Remote
Lexus Lexus Various Today, you will learn how to replace the battery in a Lexus car remote. To perform the battery replacement, press the push button located on the top …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos