Do it yourself
Frequently asked questions about cars and motorcycles

What to Do When the Tailgate of Your Lexus RX350 Won't Stay Open

Model: Lexus RX MK 4, Al20 - Years 2016-2022
Part: Car door

In this video, see that a tailgate that closes by itself after reaching its maximum height is a common fault in cars with automatic or assisted lift tailgates, like the Lexus RX350. The problem is almost always with the tailgate struts, which contain pressurised gas that helps lift the tailgate and keep it in position once raised. They fail because over time the internal gas loses pressure or escapes through worn seals; without the necessary force, they cannot counteract the weight of the tailgate, which then falls. The solution is a new pair of struts, which can be found on Amazon with code B0DDKMX4V2 for £34.99, with free shipping. The replacement is very simple: hold the tailgate up with a stick, detach the safety clips at the base of the strut, pull the ball head from its forked seat, repeat on the other side, and fit the new ones in reverse order. You will hear a "click" when the ball is secured.

Posted on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Lexus RX (2008-2015 / MK 3, Al10) The tire pressure warning light on the instrument panel of your 2009 Lexus RX350 lights up when a puncture or incorrect inflation pressure is detecte…
Lexus RX (2016-2022 / MK 4, Al20) In this tutorial, you will see how to set the time in the Lexus RX350. This operation is extremely simple and quick, to be performed, for example, af…
Lexus RX (2022-2026 / Alh10, Ala10) In this tutorial, you will see how to reset the service light on a Lexus RX350, a very simple and quick operation to perform only after completing al…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos