Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Diesel Filter on Lexus IS220

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Diesel fuel filter

See other generations:
Video tutorial

Is the diesel filter due for a change? Here's how to remove it from the Lexus vehicle. Lift the car on a column lift and locate the diesel filter.

Using pliers, remove the securing clips near the container (disconnect the cables and various hoses from the filter) where the diesel filter is located. Unscrew the securing screws near the filter container.

Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, refit the filter to the attached container (connect the hoses and cables), tighten the clips, and secure the screws.

Start the vehicle.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Lexus IS
How to Replace the Cabin Air Filter on a Lexus IS
Lexus IS (2013-2024 / MK 3) In today's video tutorial, we will go through the necessary instructions for removing and replacing the cabin air filter on a Lexus IS, following the…
Replacement of the Cabin Air Filter
Lexus IS (2013-2024 / MK 3) The cabin air filter is located on the passenger side, inside the glove compartment: therefore, open the glove compartment door and locate the cabin …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Lexus IS (1998-2005 / MK 1) The cabin air filter is located on the passenger side, inside the glove compartment: to replace it, simply open the door and remove the cap at the bo…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos