Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter on Lexus Hs

Model: Lexus HS Anf10 - Years 2009-2017
Part: Cabin air filter

In order to replace the passenger compartment air filter, it is necessary to proceed as follows: access the passenger compartment and sit in the passenger seat, open the glove compartment, on the left side inside the compartment itself there is a panel fixed by interlocking (there is a pull tab) that must be disassembled and extracted. At that point we will have access to the lid of the compartment containing the filter. Pull the cover towards you to release it and at this point it will be possible to extract the filter and replace it with a new one. Then proceed to reposition the filter box cover and reassemble the panel.

Posted on 14 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Lexus HS OEM car stereo
How to remove the Lexus HS OEM car stereo
Lexus HS (2009-2017 / Anf10) Let's see in this guide the steps that will allow us to disassemble and replace the Lexus HS OEM car stereo, following the instructions below. First …
How to replace the headlight bulb on Lexus Hs
How to replace the headlight bulb on Lexus Hs
Lexus HS (2009-2017 / Anf10) In this video tutorial we will see how to replace the Lexus Hs headlight bulb, in simple and quick steps. First we open the bonnet of our car and we …
How to know the diagrams and locations of fuses on a Lexus HS
How to know the diagrams and locations of fuses on a Lexus HS
Lexus HS (2009-2017 / Anf10) In this video we are shown the location of the fuse boxes present in a Lexus HS car and the related assignment diagrams of the same. The first fuse b…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos