Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from the Lexus HS

Model: Lexus HS Anf10 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

Video tutorial

In this guide, follow the steps to remove and replace the factory radio in the Lexus HS. First, get inside the vehicle and start removing the trim pieces located on the sides of the radio. Next, remove the shift knob and its base to access the entire radio by unscrewing all the mounting screws, as shown in the video.

At this point, disconnect the electrical connectors found at the back, and then replace the radio with the new one!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb in the Lexus Hs
How to Replace the Headlight Bulb in the Lexus Hs
Lexus HS (2009-2017 / Anf10) In this video tutorial, we will see how to replace the headlight bulb in the Lexus Hs in simple and quick steps. First, open the hood of your car and…
What is the Fuse Diagram for the Lexus HS 250h?
What is the Fuse Diagram for the Lexus HS 250h?
Lexus HS (2009-2017 / Anf10) In this video, you can see where the fuse boxes are located in the Lexus HS 250h and what their diagrams are, useful in case you need to check the fu…
How to Reset the Service Light on a Lexus HS?
How to Reset the Service Light on a Lexus HS?
Lexus HS (2009-2017 / Anf10) Resetting the service light on a Lexus HS, as shown in this tutorial, is a very simple and quick operation. Before doing this, ensure you have comple…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos