Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Lexus: how to reset the tire pressure warning.

Model: Lexus HS Anf10 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

Video tutorial

To reset the tire pressure warning on a Lexus when the TPMS light comes on the dashboard, stop in a safe place and check the pressure of all the tires. If one or more tires are low, inflate them to the correct value indicated on the vehicle's label.

After restoring the pressure to the prescribed levels, either drive the car or leave the ignition on to allow the system to detect the new values: the light will turn off automatically once the TPMS recognizes the correct pressure. The video shows the tire inflation and waiting for about a minute for the system to update.

If the warning remains on despite the correct pressures, it is recommended to have the vehicle checked at a Lexus dealership, as there may be a sensor anomaly or an unnoticed leak.


Posted on 23 November 2025 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on a Lexus HS
How to Reset the Engine Oil Light on a Lexus HS
Lexus HS (2009-2017 / Anf10) Follow the instructions below to reset the engine oil light (service) on a Lexus HS. First, get inside the vehicle and turn on the ignition, making s…
How to Reset the Service Light on a Lexus HS?
How to Reset the Service Light on a Lexus HS?
Lexus HS (2009-2017 / Anf10) Resetting the service light on a Lexus HS, as shown in this tutorial, is a very simple and quick operation. Before doing this, ensure you have comple…
How to Remove the Factory Radio from the Lexus HS
How to Remove the Factory Radio from the Lexus HS
Lexus HS (2009-2017 / Anf10) In this guide, follow the steps to remove and replace the factory radio in the Lexus HS. First, get inside the vehicle and start removing the trim pi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos