Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset Lexus Hs engine oil warning light

Model: Lexus HS Anf10 - Years 2009-2017
Part: Service warning light

We see below the instructions necessary to reset the Lexus HS engine oil warning light (service), following the instructions below. First of all we get in the car and turn on the instrument panel, making sure that all the doors are closed; after which we press and hold the button on the right of the instrument panel, turning off the ignition and waiting about ten seconds before turning it on again, as shown in the video. At this point we keep the button pressed for another ten seconds and then release it; we will see that the service warning light will be reset from the instrument panel!

Posted on 1 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Lexus: how to reset the tire pressure warning.
Lexus: how to reset the tire pressure warning.
Lexus HS (2009-2017 / Anf10) To reset the tire pressure warning on a Lexus when the TPMS light comes on the dashboard, stop in a safe place and check the pressure of all the tire…
How to reset the service in the Lexus HS?
How to reset the service in the Lexus HS?
Lexus HS (2009-2017 / Anf10) Resetting the service in the Lexus HS, as we can see in this tutorial, is an extremely simple and fast operation. Before doing this, make sure that y…
How to replace the headlight bulb on Lexus Hs
How to replace the headlight bulb on Lexus Hs
Lexus HS (2009-2017 / Anf10) In this video tutorial we will see how to replace the Lexus Hs headlight bulb, in simple and quick steps. First we open the bonnet of our car and we …

Other guides you may be interested in

Removing VW Passat Interior Lights

Below is how to replace the bulbs in all the interior lights of this vehicle. For the lights on the roof, use a flathead screwdriver to gently lever at the side where you will release the retaining clip, pull it out, and after replacing the bulb, press it back into place. For the light above the front seats, lever (with the flathead screwdriver) directly on the transparent plastic to detach it from the retaining tabs (replace the bulbs and press it back into place). For the rear light and number plate lights, perform the same operation: lever to release the tab, replace, and press back into place.

Watch the video!


by ScegliAuto

More videos