Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Lexus CT200H

Model: Lexus CT Zwa10 - Years 2011-2022
Part: Service warning light

In this video, you will see how to reset the service light on the Lexus CT200H: as with almost all cars, the first thing to do in these cases is to ensure that all doors, the boot, and the bonnet are properly closed before performing this operation. Then, with the vehicle on and the hybrid system ON, press the trip computer selection button to select "trip A". Turn off the ignition. Press and hold the selection button located under the fuel gauge. Turn on the ignition without starting the hybrid system. When the display shows "000000", release the button. Service reset.

Posted on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the Lexus CT200H
How to Reset the TPMS Light on the Lexus CT200H
Lexus CT (2011-2022 / Zwa10) If the TPMS light (related to tyre pressure) on the instrument panel of your Lexus CT200H (2011-2022) illuminates erroneously and you want to reset i…
How to Replace the Remote Battery of the Lexus CT200H?
How to Replace the Remote Battery of the Lexus CT200H?
Lexus CT (2011-2022 / Zwa10) Replacing the remote battery of the Lexus CT200H is a straightforward and quick task. You will only need a replacement CR1632 battery. First, extract…
How do you change the battery of the Lexus CT200H remote control?
How do you change the battery of the Lexus CT200H remote control?
Lexus CT (2011-2022 / Zwa10) In this video, we will see how to change the battery of the Lexus CT200H: first, we remove the emergency key by pulling it from the keychain side. Th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos