Do it yourself
Frequently asked questions about cars and motorcycles

How to recharge the starter battery on the Lexus CT200H

Model: Lexus CT Zwa10 - Years 2011-2022
Part: Battery

In this video, we will see how to restart the battery of a Lexus CT200H with a flat battery. On these cars, the starter battery is located in the trunk, and in the engine compartment, we will find a relay that acts as a positive terminal, which we can use to start a flat battery. Once the cover of this component is removed, I can connect it to a power bank (or booster) that we can find, for example, on Amazon with the code B0CG5QHGJ5 at a price of 59.99 euros, free delivery for Prime customers. We will connect the red clamp to the positive terminal we just discovered, while the black clamp can be easily connected to any metal point, which will act as the negative terminal. The bolt we see in the video is also fine. We will start the booster and let it charge the battery properly. We will check it with a multimeter, or we will let our car run for about half an hour.

Posted on 13 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Lexus CT (2011-2022 / Zwa10) Replacing the remote battery of the Lexus CT200H is a straightforward and quick task. You will only need a replacement CR1632 battery. First, extract…
Lexus CT (2011-2022 / Zwa10) In this video, we will see how to change the battery of the Lexus CT200H: first, we remove the emergency key by pulling it from the keychain side. Th…
Lexus CT (2011-2022 / Zwa10) If the TPMS light (related to tyre pressure) on the instrument panel of your Lexus CT200H (2011-2022) illuminates erroneously and you want to reset i…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos