Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. RX
    4. : How to replace the battery of the Lexus RX key remote control.

Lexus RX - Video tutorial

Model: Lexus RX Al10, MK 3 - Years 2008-2015
Part: Battery
Operation: How to replace the battery of the Lexus RX key remote control.

Today's guide will show us how to disassemble and replace the battery of the Lexus RX key remote, following these simple steps. First, take the remote in hand and start by removing the physical key from inside it; then, leverage the slot created to open the remote in two parts, accessing the electronic board and the battery, as illustrated in the video. At this point, remove and replace the battery with the new one, of the correct type (in this case a CR 1632 3V); insert it in the correct direction and finally assemble the remote!


Posted on 20 May 2024 by ScegliAuto



Replacing the remote control battery on the Lexus RX
Lexus RX (2016-2022 / Al20, MK 4) Today we will see the step by step instructions to remove and replace the key remote control battery on the Lexus RX, from 2016 to 2021. First, let's
Lexus RX450 key remote control battery replacement
Lexus RX (2008-2015 / Al10, MK 3) In this short video guide we will see how to remove and replace the remote control battery of the key of a Lexus RX 450, but also on other models of
How do I replace the Lexus RX remote control battery?
Lexus RX (2016-2022 / Al20, MK 4) In order to replace the Lexus RX remote control battery, you have to remove the emergency key from the top of the device, so that you can pry it insi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos