Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Lincoln Navigator
    4. : Checks and maintenance

Lincoln Navigator - Checks and maintenance

Lincoln Navigator (2007-2017 / U326)
How to remove the starter solenoid in the Lincoln Navigator?
The starter solenoid is a very important component of the car that connects the battery with the starter motor. If it breaks down, the car cannot be started. …read all…
Posted on 6 September 2022 by ScegliAuto
Lincoln Navigator (2007-2017 / U326)
How to reset oil service on 2015 Lincoln Aviator?
Let's see together how to reset the oil service light on the 2015 Lincoln Navigator. We get on board and after closing the doors insert the key in the ignition …read all…
Posted on 29 August 2022 by ScegliAuto
Lincoln Navigator (2007-2017 / U326)
How to change the engine oil and filter on Lincoln Navigator.
In this video we can see how it is possible to replace the engine oil and oil filter on Lincoln Navigator. The first thing to do is to buy a new oil filter and …read all…
Posted on 22 June 2022 by ScegliAuto
Car stereo (1) Battery (2) Key (3) -board computer (1) Checks and maintenance (3) Headlight (1) Air filter (1) Cabin air filter (1) Diesel filter (1) Headlight bulb (2) Door panel (1) Brake pads (1) Instrument cluster (2) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos