Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Filter on Lincoln Navigator

Model: Lincoln Navigator U326 - Years 2007-2017
Part: Checks and maintenance

In this video, you can see how to replace the engine oil and oil filter on a Lincoln Navigator. The first thing to do is purchase a new oil filter and 4 quarts of synthetic 5W-20 engine oil and XG 2 ultra (oil filter). Turn off the air suspension located in the rear of the trunk; once the air suspension is off, lift the vehicle with a hydraulic jack and place jack stands for support. Open the hood and secure it with the prop rod; then, open the oil drain plug with a 13 mm wrench and place a container under the vehicle to collect the used oil. Once all the engine oil has drained into the container, unscrew the oil filter and replace it with the new one (dispose of the oil filter properly). Reinstall the drain plug, lower the vehicle, top off the oil, and you're done.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a 2000 Lincoln Navigator
How to Replace the Air Filter on a 2000 Lincoln Navigator
Lincoln Navigator (1998-2002 / Un173) If your 2000 Lincoln Navigator's engine frequently overheats, it is time to replace the air filter. This operation can be done independently even wit…
How to Change the Cabin Air Filter in a Lincoln Navigator?
How to Change the Cabin Air Filter in a Lincoln Navigator?
Lincoln Navigator (2018-2025 / U554) In the Lincoln Navigator, the cabin air filter is located behind the glove compartment. To access it and replace it, first unclip and flip down the g…
Where is the oil filter located and how do you replace it on a Lincoln Navigator?
Where is the oil filter located and how do you replace it on a Lincoln Navigator?
Lincoln Navigator (2007-2017 / U326) The oil filter of the Lincoln Navigator is located on the lower side of the engine, near the oil pan. To remove it, start by making sure the engine i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos