Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter in a Lincoln Navigator?

Model: Lincoln Navigator U554 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

In the Lincoln Navigator, the cabin air filter is located behind the glove compartment. To access it and replace it, first unclip and flip down the glove compartment, remembering to disconnect the plugs and remove the indicated bolts in the video.

Once this step is complete, you will see the filter box, which is held closed by four clips. Open the box and remove the old filter, insert the new one in its place, and then close everything by reversing the procedure followed so far.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a 2000 Lincoln Navigator
How to Replace the Air Filter on a 2000 Lincoln Navigator
Lincoln Navigator (1998-2002 / Un173) If your 2000 Lincoln Navigator's engine frequently overheats, it is time to replace the air filter. This operation can be done independently even wit…
Where to Find the Cabin Fuse Box of the Lincoln Navigator
Where to Find the Cabin Fuse Box of the Lincoln Navigator
Lincoln Navigator (2018-2025 / U554) The cabin fuse box in your new Lincoln Navigator is well hidden for safety reasons, making it difficult to locate on your own. Carefully read the fol…
How to Replace the Fuel Filter on the Lincoln Navigator U326
How to Replace the Fuel Filter on the Lincoln Navigator U326
Lincoln Navigator (2007-2017 / U326) This guide shows how to replace the fuel filter on the Lincoln Navigator U326. The first step is to lift the left side of the vehicle to access the f…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos