Do it yourself
| ||||
|
Lincoln Mkc - Video tutorial
Model: Lincoln Mkc
MK 1
- Years 2015-2019 In this tutorial, we can see how to replace the air filter in the Lincoln MKC, a very simple and fast operation. Before doing so, make sure the engine is completely cool. Let's start by opening the hood, then move to our right, locate the filter box, and open it by unscrewing the 4 bolts with an 8mm socket wrench. Once the top half of the airbox is lifted, we remove the old filter, clean the housing from any possible residue and dirt, and insert the replacement, being careful to align the indicated tooth with its corresponding slot.
Posted on 31 May 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |