Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Lincoln MKX

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

See other generations:
Video tutorial

If you intend to replace the engine air filter, follow the step-by-step instructions provided below. After accessing the engine compartment, locate the filter on the left side.

Proceed to release the metal clips and remove the cover. Lift the cover to extract the filter and replace it with the new one. Always verify that the replacement part is compatible with your vehicle.

Reposition the cover in the compartment and secure the steel clips.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Lincoln MKX?
How to Replace the Cabin Filter in a Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) To replace the cabin filter in a Lincoln MKX, open the glove compartment located on the passenger side. This will allow you to disengage its internal…
How to Replace the Cabin Filter in a Lincoln MKX?
How to Replace the Cabin Filter in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) As you can see in this tutorial, replacing the cabin filter in a Lincoln MKX is an extremely simple and cost-effective task. First, sit in the passen…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos