Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Lincoln MKX?

Model: Lincoln Mkx MK 2 - Years: 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

As you can see in this tutorial, replacing the cabin filter in a Lincoln MKX is an extremely simple and cost-effective task. First, sit in the passenger seat, then open the glove compartment, empty it, and disconnect the end stop cord located on the right side.

Next, release the internal locks, lay the drawer on the floor, and locate the long rectangular cover at the back where the filter is positioned. Finally, clean the inside of the housing of any debris and insert the replacement in the correct orientation.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Lincoln MKX?
How to Replace the Cabin Filter in a Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) To replace the cabin filter in a Lincoln MKX, open the glove compartment located on the passenger side. This will allow you to disengage its internal…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos