Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Lincoln MKC

Model: Lincoln Mkc MK 1 - Years 2015-2019
Part: Air filter

If you want to tackle the air filter replacement on this vehicle yourself, refer to the instructions provided in this description and you can also use the video for assistance. The first step is to locate the air filter housing, which is on the left side of the compartment. Use a socket wrench to remove the screws at the end of the housing, then lift the cover to access the compartment that contains the filter. Remove the cylindrical filter and replace it with a new one that has the same specifications. Finally, close the cover, reattach the screws, and you're done.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Lincoln MKC?
How to replace the air filter in the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) In this tutorial, see how to replace the air filter in the Lincoln MKC, a very simple and quick operation. Before doing this, ensure the engine is co…
How to Replace the Battery for the Lincoln MKC?
How to Replace the Battery for the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) To replace the battery for the Lincoln MKC, open the hood to access the components inside the engine compartment. The battery will be located at the …
How to Replace the Key Fob Battery on the Lincoln MKC?
How to Replace the Key Fob Battery on the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) As seen in this tutorial, replacing the key fob battery on the Lincoln MKC is an extremely simple and quick task. Before proceeding, get a small flat…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos