Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Lincoln Navigator U326

Model: Lincoln Navigator U326 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel fuel filter

See other generations:
Video tutorial

This guide shows how to replace the fuel filter on the Lincoln Navigator U326. The first step is to lift the left side of the vehicle to access the filter housing. The filter is located on the front top of the fuel tank, protected by a plastic cover.

Remove the fuel pump fuse and proceed with the replacement by removing the two fuel lines. After installing the new filter and reinserting the fuel pump fuse, turn the ignition on a few times to prime the filter.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight of the Lincoln Navigator
How to Remove the Headlight of the Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) In today's video, you will see a very simple DIY maintenance operation related to the Lincoln Navigator. This operation is useful if you need to work…
How to Replace the Radio in a Lincoln Navigator
How to Replace the Radio in a Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) To replace the radio in a Lincoln Navigator, pry with an object on the center console of the vehicle to detach the cover surrounding the gear shift a…
How to reset the oil light on the 2010 Lincoln Navigator
How to reset the oil light on the 2010 Lincoln Navigator
Lincoln Navigator (2007-2017 / U326) In this new guide, we will help you complete the procedure that allows you to manually reset the oil light of your 2010 Lincoln Navigator. First of a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos