Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Fuel Pump Inspection Cover on Lincoln MKZ MK1

Model: Lincoln Mkz MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

This guide shows how to access the fuel pump compartment on a Lincoln MKZ MK1. The first step is to go to the rear seat compartment and lift the seat cushion by operating the two levers located under the bench. Once the bench is removed, you need to remove the three 7 mm bolts that allow access to the inspection cover.

Clean the recess from dirt before extracting the pump. Remove the fuel line and the electrical connector, and remove the pump locking ring; at this stage, it is possible that fuel will come out of the fuel line.

Reassembly is done in reverse order of disassembly.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Lincoln MKZ
How to Replace the Cabin Air Filter in a Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today, you will learn how to replace the cabin air filter in a Lincoln MKZ. First, get inside the cabin and open the glove compartment. Once removed,…
How to Replace the Battery of the Lincoln MKZ?
How to Replace the Battery of the Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the vehicle's battery, follow these steps: the battery housing is located in the trunk on the left side, and to access it, you need to unc…
How to Replace the Headlight Bulb in the Lincoln MKZ
How to Replace the Headlight Bulb in the Lincoln MKZ
Lincoln Mkz (2006-2012 / MK 1) In today's video tutorial, you will learn how to remove and replace the headlight bulb in the Lincoln MKZ by following these simple and quick steps. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos