Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Lincoln MKZ?

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Battery

See other generations:
Video tutorial

To replace the vehicle's battery, follow these steps: the battery housing is located in the trunk on the left side, and to access it, you need to unclip the two clips securing the plastic cover. Then, remove the cargo area floor panel, unscrew the plastic nuts securing the panel on the tailgate latch, and also unclip the nut securing the side panel next to the battery.

At this point, you can access the battery compartment to remove it by unclipping the power terminals. Then, take the new battery and position it, after which reconnect the terminals and reassemble the three panels.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Lincoln MKZ?
How to Replace the Key Fob Battery of the Lincoln MKZ?
Lincoln Mkz (2006-2012 / MK 1) In this tutorial, you will see how to replace the key fob battery of the Lincoln MKZ, a very simple and quick operation. First, obtain a small flathe…
How to replace the battery of the key fob remote for the Lincoln MKZ.
How to replace the battery of the key fob remote for the Lincoln MKZ.
Lincoln Mkz (2013-2020 / MK 2) Let's discover the information that will allow us to disassemble and replace the battery of the key fob for the Lincoln MKZ, in simple steps. First, …
How to Replace the Key Fob Battery for the Lincoln MKZ?
How to Replace the Key Fob Battery for the Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the key fob battery for the Lincoln MKZ, press the button located on the bottom of the device to extract the key inside the fob. After rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos