Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery on this vehicle model and are unsure how to proceed, you will find the details of the operations to perform in the description below and in the video. Once you open the hood, locate the battery on the left side just below the windshield.

First, disconnect the negative terminal, then the positive terminal, and proceed to unscrew the mounting nut of the plate at the base of the battery. After that, you can remove the battery from its housing and replace it with the new one. Then reconnect the positive terminal first, followed by the negative terminal, and finally reattach the mounting nut of the lower support plate.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Lincoln MKZ
How to Replace the Cabin Air Filter in a Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today, you will learn how to replace the cabin air filter in a Lincoln MKZ. First, get inside the cabin and open the glove compartment. Once removed,…
How to Replace the Key Fob Battery for the Lincoln MKZ?
How to Replace the Key Fob Battery for the Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the key fob battery for the Lincoln MKZ, press the button located on the bottom of the device to extract the key inside the fob. After rem…
How to replace the tail lights on a Lincoln MKZ?
How to replace the tail lights on a Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) In this tutorial, you will see how to replace the tail lights on a Lincoln MKZ, a very simple and quick operation. First, make sure the key is not in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos