Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide we will see the main ignition problems related to electrical factors on the LML Star 125, but also on the Piaggio Vespa PX 125. On the new versions there is the battery, as the first element to check in case of failure to start; we then verify the correct functioning of the starter motor gear, which must perfectly engage with the flywheel ring. Other problems that may arise could be caused by the coil and the presence of grounds that block the flow of current; therefore, check that the entire electrical system is functioning properly.

Posted on 31 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Star 125 .. gearbox oil of the Lml Star 125, as well as the Piaggio Vespa PX 125. First, place the central stand and start unscrewing the oil drain bolt located.. …
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
Star 125 .. to remove and replace the exhaust on the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin unscrewing the exhaust.. …
How to Remove the Exhaust of the Lml Star 125 - Piaggio Vespa Px 125
How to Remove the Exhaust of the Lml Star 125 - Piaggio Vespa Px 125
Star 125 .. the exhaust of the Lml Star 125, as well as the Piaggio Vespa Px 125. First, place the central stand and start by loosening the fixing bolt of the exhaust,.. …

How to Change the Engine Oil in a Triumph Thunderbird?

In this tutorial, you will learn how to change the engine oil in a Triumph Thunderbird, a very simple and quick operation. First, wait for the engine to be completely cold, then place a container underneath it, locate the drain plug, and unscrew it using an Allen key. Once all the oil in the system is collected, unscrew the oil filter housing, install the replacement, and tighten the bolt. At this point, just pour new oil through the upper hole, using a funnel if necessary.

Watch the video!


by ScegliAuto

More videos