Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Lml Star
Part: Battery

In this tutorial, you will learn how to remove and replace the battery on an LML Star 125-150-200, as well as on a Piaggio Vespa PX. First, lift the seat and detach the left side storage box. Then, remove the battery cover by unscrewing the screw. Next, unscrew the securing screws of the terminals (positive and negative) and remove the battery from the battery holder, as shown in the video. Finally, replace it with a new, correct type battery, secure the strap, reconnect the terminals, and reassemble everything!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Electronic Ignition (Flywheel and Stator) on LML Star
How to Remove the Electronic Ignition (Flywheel and Stator) on LML Star
Star In this tutorial, we will see how to remove the electronic ignition, specifically the flywheel (or rotor) and stator, on an LML Star 125-150-200, as …
How to Replace the Engine Oil Filter on an LML Star 125
How to Replace the Engine Oil Filter on an LML Star 125
Star How to replace the engine oil filter on an LML Star 125? Follow this guide to proceed with the replacement. Position the scooter on its original stan…
How to Replace the Battery of the LML Star?
How to Replace the Battery of the LML Star?
Star To replace the battery of the LML Star, open the under-seat compartment and pull the lever inside to remove the left side cover, which protects the s…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos