|
Do it yourself
| |||
| ||||
Video tutorial
To replace the clutch cable on the LML Star, first remove the screws securing the front fairing of the motorcycle so that it can be taken off: here you will find one end of the cable, which is connected to the corresponding lever. By unscrewing the bolt that connects the lever to the cable, you can detach the first end; the other end will be directly connected to the clutch. Once both ends have been disconnected, you can pull out the cable and replace it with a new spare part.
Updated on 23 May 2026 by ScegliAuto
Related tutorials
Star
To replace the clutch cable on the LML Star, disconnect its two ends, which are located at the left lever of the handlebars and the clutch at the rea…
Star
To replace the brake cable on an LML Star, loosen the bolts securing its ends: these will be at the lever to the right of the handlebar and at the re…
Star
To replace the clutch release bearing on the LML Star, first loosen the screws securing the left side cover of the motorcycle near the rear wheel: by…
|
How to Set the Clock on the Kymco Agility?
To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
