Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from the LML Star 125 - 150

Model: Lml Star 125
Part: Carburetor

Video tutorial

Watch this short and simple video on how to remove and replace the carburettor of the LML Star 125 and 150, as well as the Piaggio Vespa PX 125. First, remove the engine cover by opening the seat and releasing the catches; then close the fuel tap. Now disconnect the intake manifold and unscrew the screws of the air filter box cover to remove it, as shown in the video.

At this point, remove the filter and disconnect the fuel hose; unscrew the screw of the carburettor manifold, remove it, and replace it with the new one!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Remove the Carburettor on LML Star 125 2T - Piaggio Vespa PX 125
How to Remove the Carburettor on LML Star 125 2T - Piaggio Vespa PX 125
Star 125 In this video tutorial, you will learn how to remove and replace the original carburettor on the LML Star 125 2-stroke, as well as on the Piaggio Ves…
How to Adjust the Idle Speed on an LML Star 125 4T?
How to Adjust the Idle Speed on an LML Star 125 4T?
Star 125 To adjust the idle speed on an LML Star 125 with a 4T engine, first remove the plastic part located between the seat and the rear wheel that covers t…
Removing the Fuel Tank from an LML Star 125 - Piaggio Vespa PX
Removing the Fuel Tank from an LML Star 125 - Piaggio Vespa PX
Star 125 In this video, we will see how to remove the fuel tank from an LML Star 125, as well as from all 125-150-200 Piaggio Vespa PX models. First, lift the…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos