Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Lml Star
Part: Shocks

In order to replace the shock absorber of the LML Star, you need to loosen the screws that secure the fender on the rear side of the motorcycle, near the rear wheel itself: once the screws holding the fender are loosened, it will be possible to remove it and access the underlying components. The shock absorber can now be located by loosening the screws that secure it to its housing: these will be located at the top and bottom of the vehicle. Once the screws are loosened, the shock absorber can be completely removed and replaced with a new one.

Posted on 3 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Shock Absorbers on the LML Star?
How to Replace the Shock Absorbers on the LML Star?
Star To replace the rear wheel shock absorbers on the LML Star, first remove the cover located over the rear wheel. Once removed, unscrew the two 17 mm bo…
How to Replace the Front Shock Absorber on an LML Star?
How to Replace the Front Shock Absorber on an LML Star?
Star To replace the front shock absorber on an LML Star, first remove the front wheel by unscrewing the bolts that secure it and also remove the brake cal…
How to Remove the Rear Brake Drum on an LML Star?
How to Remove the Rear Brake Drum on an LML Star?
Star To remove the rear brake drum on an LML Star, loosen the bolts securing the panel located next to the rear wheel on the left side of the bike. Once t…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos