|
Do it yourself
| |||
| ||||
How to Apply Vinyl on the Wing Mirrors of the Lotus Evora
Model: Lotus Evora
MK 1
- Years 2009-2021
The aim of this video is to show you how to wrap the casing of the wing mirror on the Lotus Evora, which has a very complex shape with sharp edges and a deep recess at the bottom. The technique used is "preheating and stretching". Heat the vinyl sheet with a heat gun or a very hot hairdryer to make the material soft, elastic, and malleable; while the vinyl is warm, gently stretch it to adhere to the most difficult curves, preventing wrinkles and allowing the vinyl sheet to wrap around the surface. While wrapping the vinyl, continue to locally heat the edges and curved areas to ensure they adhere perfectly. Finish off with a craft knife (that is, a retractable blade to avoid scratching the bodywork) to precisely cut away the excess vinyl along the edges. Wrinkles are almost inevitable in the most extreme curves, but with the right technique, they can be minimised and made almost invisible; therefore, it is essential to practice first; this is not a task for beginners; it is advisable to practice with similarly shaped objects before proceeding.
Posted on 5 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Lotus Evora
(2009-2021 /
MK 1)
If you want to find the OBD port in your Lotus Evora, pay attention to the following guide and follow the instructions. First, ensure the car is comp…
Lotus Evora
(2009-2021 /
MK 1)
If you want to replace the engine air filter in your Lotus Evora yourself, read this guide carefully and follow the instructions. After safely parkin…
Lotus Evora
(2009-2021 /
MK 1)
The vinyl wrapping of the Lotus Evora is an aesthetic customization process that allows you to change the appearance of the bodywork without altering…
Other guides you may be interested in
|
How to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |