Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to wrap the body of the Lotus Evora.

Model: Lotus Evora MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Body

Video tutorial

The vinyl wrapping of the Lotus Evora is an aesthetic customization process that allows you to change the appearance of the bodywork without altering the paint. We purchase the wrap film online or from auto parts stores on demand.

It is possible to apply a clear protective film or a colored film that allows us to modify the vehicle. We thoroughly clean the vehicle and, using masking tape, take measurements of the part of the bodywork we wish to cover.

Some recommend wetting the film before application, while others advise against it; in the case of our tutorial video, the application is done directly on the bodywork without using any spray or water. After applying the film while avoiding the formation of air bubbles, we wait a few hours before exposing the vehicle directly to sunlight.

This is to ensure that the film adheres properly to the vehicle.


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Lotus Evora
How to Replace the Air Filter on the Lotus Evora
Lotus Evora (2009-2021 / MK 1) If you want to replace the engine air filter in your Lotus Evora yourself, read this guide carefully and follow the instructions. After safely parkin…
Where to Find the OBD Port on the Lotus Evora
Where to Find the OBD Port on the Lotus Evora
Lotus Evora (2009-2021 / MK 1) If you want to find the OBD port in your Lotus Evora, pay attention to the following guide and follow the instructions. First, ensure the car is comp…
How to Replace the Spark Plugs on the Lotus Evora
How to Replace the Spark Plugs on the Lotus Evora
Lotus Evora (2009-2021 / MK 1) The instructions below will allow you to disassemble and replace the engine spark plugs on the Lotus Evora. First, open the engine bonnet of the vehi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos