Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Lotus Evora

Model: Lotus Evora MK 1 - Years 2009-2021
Part: Spark plugs

The instructions below will allow you to disassemble and replace the engine spark plugs on the Lotus Evora. First, open the engine bonnet of the vehicle and start removing the upper engine cover by unscrewing the fixing screws; this will give you access to the spark plugs by disconnecting the ignition coils, as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with the new original ones; hand-tighten the spark plugs and then gently tighten with the wrench, then start the engine!

Posted on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the Lotus Evora
Where to Find the OBD Port on the Lotus Evora
Lotus Evora (2009-2021 / MK 1) If you want to find the OBD port in your Lotus Evora, pay attention to the following guide and follow the instructions. First, ensure the car is comp…
How to Replace the Air Filter on the Lotus Evora
How to Replace the Air Filter on the Lotus Evora
Lotus Evora (2009-2021 / MK 1) If you want to replace the engine air filter in your Lotus Evora yourself, read this guide carefully and follow the instructions. After safely parkin…
How to Replace the Battery in a Lotus Evora
How to Replace the Battery in a Lotus Evora
Lotus Evora (2009-2021 / MK 1) If you own a Lotus Evora and are wondering how to replace the battery, read this guide carefully and follow the steps described. First, ensure your c…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos