Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Thar
    4. : 2010-2020 (MK 1)

Mahindra Thar Years 2010-2020 (MK 1)

Mahindra Thar (2010-2020 / MK 1)
How to replace your Mahindra Thar key
If we need to replace the remote control key battery on this car model, we will find useful information on how to move and behave in the description below and …read all…
Posted on 4 June 2023 by ScegliAuto
Mahindra Thar (2010-2020 / MK 1)
How to reset the Mahindra service light
The procedure required to be able to manually reset the service light of your Mahindra Thar Mk1 is very simple. Thanks to the following indications you will be …read all…
Posted on 24 May 2023 by ScegliAuto
Mahindra Thar (2010-2020 / MK 1)
How to change key battery on Mahindra Thar
If we have noticed that we find it difficult to open the doors with the remote control key and we have to get very close to the car, it is probably time to …read all…
Posted on 13 April 2023 by ScegliAuto
Mahindra Thar (2010-2020 / MK 1)
How to start diesel regeneration on Mahindra Thar
Diesel engines that have a Particulate Filter (also called FAP) need this periodically to be regenerated. This is to avoid dangerous blockages that can cause …read all…
Posted on 21 September 2022 by ScegliAuto
Mahindra Thar (2010-2020 / MK 1)
How to replace the cabin air filter on the Mahindra Thar
If we have noticed that the air flow rate of the air conditioning system has decreased considerably, it is probably time to replace the cabin air filter. To do …read all…
Posted on 2 June 2022 by ScegliAuto
Mahindra Thar (2010-2020 / MK 1)
How to replace the front wipers on Mahindra Thar
Today we will see, in this video tutorial, how to remove and replace the front wipers of the Mahindra Thar, in simple and quick steps. First let's move to the …read all…
Posted on 19 May 2022 by ScegliAuto
Key (2) V-belt (1) -board computer (1) Checks and maintenance (2) Headlight (1) Air filter (1) Cabin air filter (3) Clutch (1) Grille (1) Antifreeze liquid (1) Engine (1) Engine oil (2) Instrument cluster (1) Fuse box (2) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos