Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Supro
  6. : How to replace the suspension support of the Mahindra Supro

Mahindra Supro - Video tutorial

Model: Mahindra Supro MK 1 - Years 2015-2022
Part: Suspensions
Operation: How to replace the suspension support of the Mahindra Supro

In today's video tutorial we will see how to remove and replace the front suspension mounts of the Mahindra Supro. First we lift the car and remove the front wheel; after which we proceed to disassemble and remove the suspension, removing the pin that we find on the lower part and unscrewing the bolt located on the upper part. Once the suspension has been removed we can remove the upper metal support; if necessary, we also replace the spring and therefore the worn suspension support. We just have to reassemble everything, applying the reverse procedure!


Posted on 23 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos