Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Supro
    4. : How to replace the horn on the Mahindra Supro

Mahindra Supro - Video tutorial

Model: Mahindra Supro MK 1 - Years 2015-2022
Operation: How to replace the horn on the Mahindra Supro

In this short and simple guide we will see the steps that will allow us to remove and replace the bumper trim and the horn of the Mahindra Supro. First of all, let's move to the front of the car and start disassembling and removing the front bumper grille, levering the sides to release it; we will then find the horn on the central part, behind the mask, as shown in the video. At this point we disconnect the horn electrical connector, unscrewing the bracket screw to remove it and replace it with the new one, applying the reverse procedure!


Posted on 8 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos