Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mahindra TUV 300

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Service warning light

Manually resetting the service light on the Mahindra TUV 300 is undoubtedly one of the quickest and simplest tasks you can perform on your own at any time. Just carefully read the following mini-guide to avoid any difficulties. First, ensure that the vehicle is completely off before starting the procedure. Next, locate the "Set" button to the right of the tachometer and hold it down. At the same time, insert the key and turn on the ignition. After a few seconds, release the "Set" button, and the reset is complete. If you encounter any errors, simply turn off the ignition and start over.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mahindra Tuv 300
How to Reset the Service Light on the Mahindra Tuv 300
Mahindra Tuv300 (2015-2020 / MK 1) With this new mini guide for the Mahindra Tuv 300, you will be able to manually reset the service light without the help of a professional in just a …
How to Clean the Cabin Air Filter in the Mahindra TUV 300
How to Clean the Cabin Air Filter in the Mahindra TUV 300
Mahindra Tuv300 (2015-2020 / MK 1) Cleaning the cabin air filter installed inside your Mahindra TUV 300 is a very important task that should be done periodically to reduce the risk of …
How to Reset the Odometer on Mahindra Tuv300
How to Reset the Odometer on Mahindra Tuv300
Mahindra Tuv300 (2015-2020 / MK 1) This video shows how to reset the odometer on a Mahindra Tuv 300. The process is straightforward and does not require difficult steps. First, get ins…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos