Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Odometer on Mahindra Tuv300

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Warning light – error code

This video shows how to reset the odometer on a Mahindra Tuv 300. The process is straightforward and does not require difficult steps. First, get inside the vehicle and turn on the ignition. You will notice two buttons on the dashboard, the mode button on the left and the set button on the right. To reset the odometer, press the mode button multiple times until you select the "trip A" option, where you will see the total miles. The last step is to press and hold the set button for a few seconds until the display shows the odometer reset.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Mahindra Tuv300?
How to Reset the Service Light in a Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) The video here shows how to reset the service light, the one shaped like a wrench that appears on the display, in a Mahindra Tuv300, but the same pro…
How to Replace the Rear Wheel of the Mahindra Tuv300?
How to Replace the Rear Wheel of the Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) To replace the rear wheel of the Mahindra Tuv300, open the trunk and lift the rear seat to access the spare tire kit located underneath. Using the ja…
How to Replace the Horn on the Mahindra Tuv300
How to Replace the Horn on the Mahindra Tuv300
Mahindra Tuv300 (2015-2020 / MK 1) In this video tutorial, you will learn how to remove and replace the horn on the Mahindra Tuv300 by following the instructions below. First, open the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos