Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Tuv300
    4. : How to reset the Mahindra Tuv 300 service light

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: -board computer
Operation: How to reset the Mahindra Tuv 300 service light

Thanks to this new mini guide on the Mahindra Tuv 300 you will be able to manually reset the service light without the help of a professional and in just a few seconds. You just have to pay attention to the following indications. First, make sure the car is completely off, then locate the button located immediately below the rev counter and hold it down. At the same time insert the key and turn on the instrument panel. As soon as the maintenance light disappears from the mini-display of the on-board computer, release the button and you're done.


Posted on 15 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos