Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Mahindra Maxximo

Model: Mahindra Maxximo MK 1 - Years 2010-2015
Part: Diesel fuel filter

If you need to replace the fuel filter on this vehicle, follow the instructions below and check out the tutorial video. The filter on this vehicle is located under the hood. Use the appropriate wrench to unscrew the cap after disconnecting the electrical connector underneath. Once the cap is completely unscrewed, you can remove the filter. Take the new filter, ensuring that the specifications are compatible with those of the vehicle, replace the gasket, clean the seat, and proceed to reassemble the filter. Re-screw the cap and reconnect the connector.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Injectors on the Mahindra Maxximo
How to Replace the Fuel Injectors on the Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) Follow these main steps to remove and replace the fuel injectors on the Mahindra Maxximo. First, open the hood of your vehicle and start disconnectin…
How to Renew the Body of Your Mahindra Maxximo
How to Renew the Body of Your Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) As shown in the video, the Mahindra Maxximo van or microvan can wear down over time, with paint peeling and rust forming. To restore it to like new c…
Replace the Serpentine Belt on the Mahindra Maxximo
Replace the Serpentine Belt on the Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) Today, we will see in this video tutorial how to remove and replace the serpentine belt on the Mahindra Maxximo by following these simple and quick s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos