Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will find instructions to remove and replace the fairings on a Malaguti Phantom F12 50 scooter. First, place the scooter on its stand and remove the seat; then unscrew all the fastening screws found inside the fairings, prying at the sides to detach and remove them. Next, unscrew the screws located under the handlebars, as well as those on the front shield; then remove the fairings and the front headlamp, also taking off the handlebar cover. Carry out the repair or replacement of the fairings.

Posted on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Malaguti Phantom F12 70?
How do you disassemble the engine of the Malaguti Phantom F12 70?
Phantom F12 50 In order to disassemble the engine of the Malaguti Phantom F12 70, you need to loosen the screws that secure the fairings around the underseat compar…
How to Remove the Instrument Cluster from a Malaguti Phantom F12
How to Remove the Instrument Cluster from a Malaguti Phantom F12
Phantom F12 50 Before starting, position your Malaguti Phantom F12 on the central stand. Begin by unscrewing and removing the lower screws that secure the instrumen…
How to Remove the Seat and Under-Seat of a Malaguti Phantom F12
How to Remove the Seat and Under-Seat of a Malaguti Phantom F12
Phantom F12 50 Before you can start, position your Malaguti Phantom F12 on the centre stand. Begin by opening the seat to access the under-seat compartment. Next, u…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos