Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Opening the Lock on a Malaguti Phantom F12

Model: Malaguti Phantom F12 50
Part: Engine

Video tutorial

First, remove the entire seat lock by unscrewing the screws that secure it to the fairing. Disconnect the radiator reservoir, locate the lower hose and detach the clip, prepare a container and disconnect the radiator hose, draining the fluid into the container (tilt the scooter slightly).

At this point, remove the exhaust by unscrewing the bracket screws, then disconnect the electrical cables. Now it’s time to remove the carburettor, then loosen the lower wheel and place the scooter on stands.

Finally, you are ready to remove the lock as shown in the video.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster from a Malaguti Phantom F12
How to Remove the Instrument Cluster from a Malaguti Phantom F12
Phantom F12 50 Before starting, position your Malaguti Phantom F12 on the central stand. Begin by unscrewing and removing the lower screws that secure the instrumen…
How to Dismantle the Engine of the Malaguti Phantom F12 50?
How to Dismantle the Engine of the Malaguti Phantom F12 50?
Phantom F12 50 To dismantle the engine of the Malaguti Phantom F12 50, you need to completely remove the engine block from its housing by loosening the screws that …
How do you disassemble the engine of the Malaguti Phantom F12 75?
How do you disassemble the engine of the Malaguti Phantom F12 75?
Phantom F12 50 It will be possible to disassemble the engine of the Malaguti Phantom F12 75 by loosening the screws that secure the engine block to its housing, at …

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos